All Our Prices Include Standard Postage Worldwide (unless otherwise stated) !!
There is a minimum order value of £10.00 (GBP)!

Ignition Coils

Another Rooster Ignitions ProductD1D7CK

BSA Bantam D1-D7 Ignition Coil with soldered HT Cable and Spark Plug Cap

This is an extra service we offer with our ignition coils. We can supply the ignition coil with a pre-soldered HT cable and an unsuppressed spark plug cap.
The HT cable and spark plug cap are black.
Please email us with either the Bantam model or the length of HT cable you require.
Please Note: Actual item may be a different colour than the one shown.
£25.50
Qty:
Another Rooster Ignitions ProductD1D7IC

BSA Bantam D1-D7 Ignition Coil

This ignition coil will fit all BSA Bantam D1-D7 models which the exception of the Lucas model.

We also supply this product complete with an HT lead soldered onto the ignition coil and a non-resistor (un-suppressed) spark plug cap. The HT lead can be cut to your required length and the cost is 28.50
Please contact us for further details

This item replaces the original equipment and can be used with or without one of our electronic ignition modules.
Please note: Actual item may be a different colour from the one shown.
£20.99
Qty:
Another Rooster Ignitions ProductDC1-12

Dual Output 12V Ignition Coil (5.0 ohms)

This is a 12v Dual Output Ignition Coil and has two HT Leads connected to it.You can either replace an existing dual output coil or in many cases you can bypass the distributor cap and rotor arm on a twin cylinder engine and employ the Wasted Spark ignition principle (see our downloads page for details). Many dual contact breaker systems can also be enhanced. This works on a 360 degree and many 180 degree firing engines and is a simple conversion. If used with a Rooster Booster Ignition Module you will eradicate points errosion, condensor issues, distributor cap problems and rotor arm wear. Many customers have also reported greatly improved roll off/on throttle response. This ignition coil is rated at 5 ohms and has 500mm HT Leads fitted.
£36.00
Qty:
Another Rooster Ignitions ProductDC1-6

Dual Output 6V Ignition Coil (4.5 ohms)

This is a 6v Dual Output Ignition Coil and has two HT Leads connected to it.You can either replace an existing dual output coil or in many cases you can bypass the distributor cap and rotor arm on a twin cylinder engine and employ the Wasted Spark ignition principle (see our downloads page for details). Many dual contact breaker systems can also be enhanced. This works on a 360 degree and many 180 degree firing engines and is a simple conversion. If used with a Rooster Booster Ignition Module you will eradicate points errosion, condensor issues, distributor cap problems and rotor arm wear. Many customers have also reported greatly improved roll off/on throttle response. This ignition coil is rated at 4.5 ohms and has 500mm HT Leads fitted.
£36.00
Qty:
Another Rooster Ignitions ProductDC2-6

Dual Output 6V Ignition Coil (1.08 ohms)

This is a 6v dual output ignition coil for machines with a generator capable of supplying more than 65w. It will produce a stronder spark at a higher current but is not suitable for electronic ignition.
£28.00
Qty:
Another Rooster Ignitions ProductLCC1

Ignition Coil Clamp for a Lucas MA6/MA12 style igntion coil

Ignition Coil Clamp for a Lucas MA6/MA12 style igntion coil. Fits most standard size single output motorcycle ignition coils.
£5.00
Qty:
Another Rooster Ignitions ProductRC12-1A

Small PVL Type 12V Ignition Coil

This is a universal 12v small cased PVL type ignition coil. It is rated at 3 ohms impedance and can be used with a standard contact breaker configuration or with a Rooster Booster electronic ignition system. It has a small metallic housing and measures just 11cm in length with a 4.5cm diameter can. It is easy to fit and is supplied with an electrical fitting kit to suit most installations.
£21.50
Qty:
Another Rooster Ignitions ProductRC6-1A

Small Diameter 6V Ignition Coi (40mm)

This is a universal 6v 40mm diameter ignition coil. It is rated at 3 ohms impedance and can be used with a standard contact breaker configuration or with a Rooster Booster electronic ignition system. It has a small metallic housing and measures just 11cm in length with a 4.5cm diameter can. It is easy to fit and is supplied with an electrical fitting kit to suit most installations.
£23.50
Qty:
Another Rooster Ignitions ProductRMA-12

Standard 12V Ignition Coil (Genuine Lucas MA12)

This is a genuine Lucas branded standard sized 12v, universal oil filled ignition coil.
We also sell seperately a 2 inch coil bracket for this item.

Primary impedance: 3 to 3.4 ohms.
Total Length: 5 inches.
Body Diameter: 1 7/8 inches.
£21.00
Qty:
Another Rooster Ignitions ProductRMA-6

Standard 6V Ignition Coil (Genuine Lucas MA6)

This is a genuine Lucas branded standard sized 6v, universal oil filled ignition coil.
We also sell seperately a 2 inch coil bracket for this item.

Primary impedance: 1.8 to 2.4 ohms.
Total Length: 5 inches.
Body Diameter: 1 7/8 inches.
£21.00
Qty:
Another Rooster Ignitions ProductWW19377

Energy Transfer (ET) Ignition Coil

Energy Transfer (ET) Ignition coil for use on Triumph, BSA and other models with batteryless ignition.
This coil can be used for both 6V and 12V points, or CDI/ET ignition systems.
Original Lucas part numbers were LU45149 and LU45150.
£20.50
Qty:

Other Products and Developments are already in progress.... watch this space.!