All Our Prices Include Standard Postage Worldwide (unless otherwise stated) !!
There is a minimum order value of £10.00 (GBP)!

HT Lead and Wiring

Another Rooster Ignitions Product88SASKT1/2

Lucas 88SA Ignition Switch Socket and Wiring

Switch socket for 88SA ignition switch, rubber with leads.
£36.00
Qty:
Another Rooster Ignitions Product88SASKT2/2

Lucas 88SA Lighting Switch Socket and Wiring

Replica Lucas Switch socket for 88SA light switch, rubber with leads.
As fitted on BSA C15/B40, Triumph 3TA and other models.
£28.00
Qty:
Another Rooster Ignitions ProductBPFS-2

BPF Headlight Bulb Socket

If your original headlight bulb holder is rusty and worn or the cabling is brittle and damaged, replace it with this British Pre Focus (BPF) headlight bulb holdersocket. This will ensure a good contact with the bulb and enhance the lighting efficiency. This is a particually good investment if you also purchase one of our other BPF lighting products.
£4.25
Qty:
Another Rooster Ignitions ProductH4SKT/2

H4 (P43 and P43t) Headlight Bulb Socket

Female fitting to connect directly to an H4 or P43t headlight bulb.
Supplied with trailing wires to allow connection to any other wiring harness.
Wiring instructions can be found on our Documentations page.
£3.99
Qty:
Another Rooster Ignitions ProductHTC1

1m Copper Core HT Lead (7mm)

1m of high quality 7mm black HT cable made in a modern insulation with a copper core.
£2.50
Qty:
Another Rooster Ignitions ProductHTL1

HT Cable (7mm) & Spark Plug Cap

1m of Quality Copper Cored 7mm (OD) HT Ignition Cable fitted with an Un-Suppressed (non-resistor) Spark Plug Cap
£5.50
Qty:
Another Rooster Ignitions ProductPCLIP10

White Nylon Cable P Clip (x10)

Handy white nylon P Clip cable guides to connect wiring to the vehicle frame or chassis.
Easy to fit single bolt or screw mounting.
Supplied in a bag of 10 clips.
£1.25
Qty:
Another Rooster Ignitions ProductPLBH1/2

Rubber Mounted Motorcycle Pilot Light Bulb Holder (BA9S)

Motorcycle Pilot Side Light Bulb Holder which pushfits into headlight lens reflector using a rubber mounting (supplied).
This item has two wire fitting as used on many British, European and Japanese motorcycles.
It can be used with 6v and 12v BA9S bulbs. - bulb not included.
£4.50
Qty:
Another Rooster Ignitions ProductPLBH2/2

Genuine Lucas Cage Mounted Pilot Bulb Holder (BA9S)

Genuine Lucas motorcycle Pilot Side light bulb socket which pushfits into headlight lens reflector using a finger type cage mounting.
This item has one or two wire fitting. The bulb can either be earthed via the metallic backplate of the lens or using the second wire on the holder.This type of fitting is used on many British, European and Japanese motorcycles.
It can be used with 6v and 12v BA9s bulbs. - bulb not included.
£6.99
Qty:
Another Rooster Ignitions ProductSO781/2SK2

Wipac SO781/2 Ignition Lighting Switch Socket

Hard to find replacement wiring harness socket for the Wipac SO781/2 switch.
This socket need to be soldered onto wiring tails or directly to your original loom.
It is supplied with a rubber terminal cover so even if your soldering is terrible, it will still look good.
As used on BSA Bantams, Norton, AJS, Matchless and many other machines.
£17.99
Qty:
Another Rooster Ignitions ProductWHBBAC

BSA Bantam D1 (and Others) Direct AC Wiring Harness

This is a wiring loom for a BSA Bantam D1 (and Others) Direct AC (no battery) model motorcycle.
It is designed for both the original Wipac switch with screw terminal connections and the later Wipac SO781/2 type switch. The colour coding and wiring is the same on both machines.
If you are using the later type of switch you can either connect your original switch socket or solder the wires directly to the base of the SO781/2 switch or we can supply a new Wipac SO781/2 socket for you to solder in place (Our Part Number: SO781/2SK2).
£25.00
Qty:
Another Rooster Ignitions ProductWHD14

Wiring harness - BSA Bantam D10, D14, B175

Genuine Lucas manufactured wiring harness to replace original Wipac loom on a BSA Bantam D10, D14 or B175 battery model.
This quality item is supplied with both Wipac switch sockets connected to the wiring and is ready to fit.
£64.00
Qty:
Another Rooster Ignitions ProductWHD7DS

Wiring harness - BSA Bantam D7 twin switch

Genuine Lucas manufactured wiring harness to replace original Wipac loom on a BSA Bantam D7 twin switch model.
This quality item is supplied with both Wipac switch sockets connected to the wiring and is ready to fit.
£64.00
Qty:

Other Products and Developments are already in progress.... watch this space.!